Profile | Details | Specification | Performance | Finishes | Retrofit | Projects | Contact Us

ULTRA SEAM
Standing Seam Panel

Curved and Tapered Roofing Systems

Ultra Seam US-100SS, US-150SS and
US-200SS (Slim Seam)
Each Slim Seam panel has a single upstanding leg on each side. After a panel is laid, the clips are installed up against the panel leg, with half of each clip folded over the leg. The adjacent panel is then laid up against the clips, and the other half of each clip is folded down. Finally the batten cap is snapped down over all clips in the seam along the entire length of the panel. The panels are now securely attached with the completed seam enclosing all clips. Seams require no machine closing and rapid installation means low in-place cost. This panel can be used for curved roofs as well. Also available in 1-1/2" rib height (US-150SS) and 2" rib height (US-200SS).
The US-100 has a rib height of 1". The US-150 has a rib height of 1.5"
The US-200SS has a rib height of 2"
Profile | Details | Specification | Performance | Finishes | Retrofit | Projects | Contact Us

Last updated: 6/15/00

©2000-2003 Architectural Metal Products
Questions? Call 1-800-267-1296